Order by:   Filter results: 
Web Code Reference Description Category Price
17782 S-24914 KNX LED RGBW dimmer BASIC 4CH Constant Voltage 12-24 V ACTUATORS - OUTPUTS

The BASIC series is a 1 to 4-channel LED RGBW dimmer for modules in constant current operation.

Its small design and high levels of reliability are impressive, and it is ideal in areas with difficult access.

An external power supply is required for operation. Automatic device load detection (1, 2, 3 or 4 channels).

Distribution of the entire output of max. 10 A to 1 – 4 channels.

Technical information:

Supply voltage 12 – 24 VDC
Output rating 240 W/24 V
Output voltage 12 – 24 VDC
Dimming range 0 ... 100 %
Ambient temperature range +5°C ... 45°C
Protection class IP 20
Wire cross-section 0.75 – 1.5 mm2
Reverse polarity protection Yes
Dimensions (L x W x H) 95 x 53 x 33 mm

17782
S-24914 KNX LED RGBW DIMMER BASIC 4CH CONSTANT VOLTAGE 12-24 V ACTUATORS - OUTPUTS
17792 101673 LED RGBW Dimmer REG series 4CH 12-24V ACTUATORS - OUTPUTS

The REG series is a 1 to 4-channel LED RGBWdimmer for modules in constant current operation, suitable for top hat rail assembly in the switch or distributor cabinet.
Automatic device load detection (1, 2, 3 or 4 channels).
Distribution of the entire output of max. 14 A to 1 to 4 channels.
An external power supply is required for commissioning. Triple distribution unit for distributor installation.

Technical Information:

Supply voltage 12 – 24 VDC
Output rating up to 330 W/24 V
Output voltage 12 – 24 VDC
Dimming range 0 ... 100 %
Ambient temperature range +5 °C ... 45 °C
Protection class IP 20
Wire cross-section 0.5 – 6 mm2
Reverse polarity protection Yes
Dimensions (L x W x H) 52 x 90 x 59 mm

17792
101673 LED RGBW DIMMER REG SERIES 4CH 12-24V ACTUATORS - OUTPUTS
17793 SXT-24914 KNX LED RGBW dimmer SXT 4CH ACTUATORS - OUTPUTS

The SXT series is a 1 to 4 channel LED RGBW dimmer for constant voltage-powered LED
modules with integrated power supply,
Output signal PWM (= pulse width modulation) 600 Hz.

Supply voltage 230 VAC/50 Hz
Output rating up to 100 W/24 V
Output voltage 24 VDC
Dimming range 0 ... 100 %
Ambient temperature range +5 °C ... +45 °C
Protection class IP 20
Wire cross-section Primary: 0.5 – 4 mm2
Secondary: 0.25 – 2.5 mm2
Reverse polarity protection Yes
Dimensions (L x W x H) 226 x 53 x 45 mm

17793
SXT-24914 KNX LED RGBW DIMMER SXT 4CH ACTUATORS - OUTPUTS
10103 80-XT01 Installation profile XT for LED stripes with power (2 m) SIN FAMILIA
anodized of aluminium, perfect cooling properties, easy assembly, cover available as an accessory LxWxH: 2000 x 30 x 15 mm (0,53 g/unit)
10103
80-XT01 INSTALLATION PROFILE XT FOR LED STRIPES WITH POWER (2 M) SIN FAMILIA
10104 80-XT02 Mounting profile XT for LED stripes with power (2 m) SIN FAMILIA
anodized from aluminium, perfect cooling properties, easy assembly, covers available as an accessory, LxWxH: 2000 x 23,5 x 13,5 mm (0,47g/unit)
10104
80-XT02 MOUNTING PROFILE XT FOR LED STRIPES WITH POWER (2 M) SIN FAMILIA
10602 V0324150 Power supply 24 V DC / 150 W, IP 20, RoHs conformity SYSTEM DEVICES

Type Enclosed, Imax 6.5, 150W, 24V. Dimension 199x98x38

10602
V0324150 POWER SUPPLY 24 V DC / 150 W, IP 20, ROHS CONFORMITY SYSTEM DEVICES
10604 V0324060-IP Power supply 24 V DC / 60 W, IP 67, SYSTEM DEVICES

Type closed, Imax 2.5, 60W, 24V. Dimension  163x43x32

10604
V0324060-IP POWER SUPPLY 24 V DC / 60 W, IP 67, SYSTEM DEVICES
10605 V0324100-IP Power supply 24 V DC / 100 W, IP 67, SYSTEM DEVICES

Type closed, Imax 4.5, 100W, 24V. Dimension  190x52x37

10605
V0324100-IP POWER SUPPLY 24 V DC / 100 W, IP 67, SYSTEM DEVICES
10606 V0324150-IP Power supply 24 V DC / 150 W, IP 67 SYSTEM DEVICES

Type closed, Imax 6.5, 150W, 24V. Dimension  228x68x39

10606
V0324150-IP POWER SUPPLY 24 V DC / 150 W, IP 67 SYSTEM DEVICES
10607 V0324030-K Power supply 24 V DC / 30 W, IP 44 SYSTEM DEVICES

Type closed, Imax 1.25, 30W, 24V. Dimension  160x46x30

10607
V0324030-K POWER SUPPLY 24 V DC / 30 W, IP 44 SYSTEM DEVICES
10609 V0324100-K Power supply 24 V DC / 100 W, IP 44 SYSTEM DEVICES

Type closed, Imax 4A, 100W, 24V. Dimension  201x70x35

10609
V0324100-K POWER SUPPLY 24 V DC / 100 W, IP 44 SYSTEM DEVICES
12332 80-SX30 Linearlens SX30 SIN FAMILIA

Linearlens SX30 slightly curved, emission angle 35° along the longitudinal axis, suitable for XT profiles, homogeneous light spread, assembly without tools via click system, LxWxH: 2000 x 23,5 x 5,5 mm (0,29g/unit)

12332
80-SX30 LINEARLENS SX30 SIN FAMILIA
12719 V0324060-K Power supply 24 V DC / 60 W, IP 44 SYSTEM DEVICES

Type closed, Imax 2.5, 60W, 24V,IP 44. Dimension  182x62x35

12719
V0324060-K POWER SUPPLY 24 V DC / 60 W, IP 44 SYSTEM DEVICES
12334 80-XT00E Recessed Profile, 80-XT00E Endcaps Alu SIN FAMILIA
Bilton Endkappe zu Einbauprofil XT01 Alu
12334
80-XT00E RECESSED PROFILE, 80-XT00E ENDCAPS ALU SIN FAMILIA
12335 80-xtc1 Surface Mounted Profile, 80-XTC1 mounting clip SIN FAMILIA
Surface Mounted Profile, 80-XTC1 mounting clip
12335
80-XTC1 SURFACE MOUNTED PROFILE, 80-XTC1 MOUNTING CLIP SIN FAMILIA
12336 80-xtc2 Surface Mounted Profile, 80-XTC2 insall quill SIN FAMILIA
Surface Mounted Profile, 80-XTC2 insall quill
12336
80-XTC2 SURFACE MOUNTED PROFILE, 80-XTC2 INSALL QUILL SIN FAMILIA
14650 CUT Cut the LED strip OTHER ACCESSORIES
Cut the LED strip
14650
CUT CUT THE LED STRIP OTHER ACCESSORIES
14651 Connector Connectors for strip LED OTHER ACCESSORIES
Connectors for strip LED
14651
CONNECTOR CONNECTORS FOR STRIP LED OTHER ACCESSORIES
18470 SXT-24414 DALI LED RGBW Dimmer SXT Series ACTUATORS - OUTPUTS

The SXT series is a 1 to 4 channel LED RGBW dimmer for constant voltage-powered LED
modules with integrated power supply,
Output signal PWM (= pulse width modulation) 600 Hz.
Technical details Input voltage 230 VAC/50 Hz.
Output current: max. 1 A per channel (total max. 4 A)
Protection class IP20
Dimensions (L x W x H) = 226 x 53 x 45 mm

18470
SXT-24414 DALI LED RGBW DIMMER SXT SERIES ACTUATORS - OUTPUTS
18719 101639 Dimmer DALI BASIC 10 A ACTUATORS - OUTPUTS
The BASIC series is a 1 to 4-channel LED dimmer for modules in constant current
operation. Its small design and high levels of reliability are impressive, and it
is ideal in areas with difficult access. An external power supply is required for
operation. Automatic device load detection (1, 2, 3 or 4 channels). Distribution of
the entire output of max. 10 A to 1 – 4 channels.
Technical details Input voltage 12 – 24 VDC
Output current: max. 2.5 A for 4 assigned channels
Protection class IP20
Dimensions (L x W x H) = 95 x 53 x 33 mm
18719
101639 DIMMER DALI BASIC 10 A ACTUATORS - OUTPUTS
18720 170229 DALI Power Supply SYSTEM DEVICES
The power supply for the DALI bus system. With an output of 240 mA, up to 64 addressed participants and 20 – 30 control modules can be
connected.
18720
170229 DALI POWER SUPPLY SYSTEM DEVICES
18721 170222 Multifunctional DALI touchpanel VISUALIZATION
Multifunctional DALI touchpanel for single and multiple channel applications (white or RGBW). Three light circuits can be controlled. Confi-
guration via DALI software.
18721
170222 MULTIFUNCTIONAL DALI TOUCHPANEL VISUALIZATION
19925 170868 BILTONRGB 600 LED strip 24VDC 14,4W/m IP00 470-625nm COLOR 5m LED module BLRGB PRO SIN FAMILIA

BILTONRGB 600 LED strip 24VDC 14,4W/m IP00 470-625nm COLOR 5m
LED module BLRGB PRO

Article 170868

Linear LED light strip on a flexible circuit board. Installation using
self-adhesive heat-conducting adhesive tape in conjunction with
Plug-&-Play connection system. Dimmable using BILTON LED dimmer.

Suitable for ambient temperatures from -20...+45 °C at a service life
of 36000 h / L70B10 .

The BLRGB PRO LED-strip has a luminous flux of 600 lm/m at 14.4 W,
resulting in an efficiency of 42 lm/W. At a nominal voltage of 24 V DC
on the connection, a maximum module length of 5.0 m can be achieved.
In terms of lighting, the module has a colour temperature of RGB and a
beam angle of 120°. The light strip can be separated every 50.0 mm,
resulting in a LED distance of 8.3 mm. Degree of protection IP00

Dimension (L x W x H): 5000.0 mm x 8.0 mm x 2.5 mm

19925
170868 BILTONRGB 600 LED STRIP 24VDC 14,4W/M IP00 470-625NM COLOR 5M LED MODULE BLRGB PRO SIN FAMILIA
19926 100505 BILTONONE TW 1300 LED strip WHITE 5m 24V DC 14,0W/m IP00 CRI>80 2700-5000K SIN FAMILIA
80 2700-5000K ">BILTONONE TW 1300 LED strip 24V DC 14.0W / m IP00 CRI> 80 2700-5000K
WHITE 5m
LED module BLTW ONE

Article 100505


    Tuneable White (TW) e = selectable color temperature in a wide range of white light
    Physiologically valuable light (Human Centric Lighting)
    Adaptation to the biorhythm using a suitable control system


Linear LED light strip on a flexible circuit board. Installation using
self-adhesive heat-conducting adhesive tape in conjunction with
Plug & Play connection system. Dimmable using BILTON LED dimmer.

Suitable for ambient temperatures from -20 ... + 45 ° C at a service life
of 60000 h / L80B10.

The BLTW ONE LED strip has a luminous flux of 1300 lm / m at 14.0 W,
resulting in an efficiency of 108 lm / W. At a nominal voltage of 24V
DC on the connection, a maximum module length of 2.0 m can be
Achieved. In terms of lighting, the module has a color temperature of
2700-5000 K and a beam angle of 120 °. All this with a color
80 Raand a Binning selection based on 3 SDCM ">rendering index of> 80 Raand a Binning selection based on 3 SDCM
(MacAdam). The light strip can be separated every 100.0 mm, resulting
in a LED distance of 16.7 mm. Degree of protection IP00

Dimension (L x W x H): 5000.0 mm x 8.0 mm x 1.5 mm
19926
100505 BILTONONE TW 1300 LED STRIP WHITE 5M 24V DC 14,0W/M IP00 CRI>80 2700-5000K SIN FAMILIA
19942 170256 BILTON Profile YT02 Support 12W / m L2000xB17,5xH8,6mm SIN FAMILIA
BILTON Profile YT02 Support 12W / m L2000xB17,5xH8,6mm
BILTON Support profile YT02

Article 170256

The Support profile YT02 can be combined with all covers from the YT
Familia.

The profile is made of Aluminum with an anodisiert / eloxiert finish
and you have a power of up to 12 W / m.

Dimensions (L x W x H): 2000.0 mm x 17.5 mm x 8.6 mm

Please note that cutting tolerances may occur.
19942
170256 BILTON PROFILE YT02 SUPPORT 12W / M L2000XB17,5XH8,6MM SIN FAMILIA
19943 170376 BILTON Cover YT satined U-shape 170x170° 65% PMMA L2000xB17,5xH9,5mm SIN FAMILIA

BILTON Cover YT satined U-shape 170x170° 65% PMMA L2000xB17,5xH9,5mm
BILTON U-Cover YX03

Article 170376

The U-Cover YX03 cover can be combined with all profiles from the CT
family

The cover consists of PMMA and has a satiniert finish with a
transmittance degree of 65 %. Easy installation via steckbar into the
profile.

Dimension (L x W x H): 2000.0 mm x x

Please note that cutting tolerances may occur.

19943
170376 BILTON COVER YT SATINED U-SHAPE 170X170° 65% PMMA L2000XB17,5XH9,5MM SIN FAMILIA
19944 170468 BILTON MOUNTING YT Clip Steel 19,5x7,5x10mm SIN FAMILIA

BILTON MOUNTING YT Clip Steel 19,5x7,5x10mm

Accessories Clip steel YTC5

Article 170468

The accessories Clip steel YTC5 consists of Edelstahl and it is easy to assemble.

Dimension (L x W x H): 10.0 mm x 19.5 mm x 7.5 mm

19944
170468 BILTON MOUNTING YT CLIP STEEL 19,5X7,5X10MM SIN FAMILIA
19945 170465 BILTON ENDCAP for YT02 + Cover U-shape ALU L4,5xB17,5xH16,1mm IN-Dim SIN FAMILIA
BILTON ENDCAP for YT02 + Cover U-shape ALU L4,5xB17,5xH16,1mm IN-Dim
1,5mm without drill hole
BILTON Endcap YT00U-A

Article 170465

The Endcap YT00U-A consists of and has a eloxiert . Easy installation
via steckbar into the profile.

Dimension (L x W x H): 4.5 mm x x
19945
170465 BILTON ENDCAP FOR YT02 + COVER U-SHAPE ALU L4,5XB17,5XH16,1MM IN-DIM SIN FAMILIA
20025 101670 BILTON REG DALI/Switch 12-24VDC 330W IP20 4CH 3,5A/channel LED dimmer ACTUATORS - OUTPUTS

 

DALI / SWITCH DIMMER REG 336 W / 24 V

BILTON REG DALI/Switch 12-24VDC 330W IP20 4CH 3,5A/channel LED dimmer BILTON REG DALI/Switch Article 101670 The REG series is a 1- to 4
channel LED dimmer for modules in constant current operation. The total load of max. 14000 mA can be freely distributed to these diese 4 channels. The
controller is operated with DALI/Switch and 12-24 VDC and has an output voltage of 12-24 VDC. The power dissipation in stand-by is 1 W. The dimming
frequency of the PWM signal is 600 Hz. Protection degree IP20 and protection class III . Dimension (L x W x H): 52.0 mm x 90.0 mm x 59.0 mm

20025
101670 BILTON REG DALI/SWITCH 12-24VDC 330W IP20 4CH 3,5A/CHANNEL LED DIMMER ACTUATORS - OUTPUTS


KNX SPECIAL CATALOGUES
Push buttons
Smart metering
MDT Catalog 2017
Iddero Verso Interactive Presentation

LEARN
Free webinars
uBrick Tutorials
VideoTutorials CBSE
TEST
Free test of CBSE visualization

LATEST KNX NEWS
All news

LATEST KNX OFFERS
All offers
DOWNLOADS
KNX - All brands

FUTURASMUS KNX GROUP
Contact
Location
Futurasmus in the world
FOLLOW US
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

KNX++ TRAINING CENTER
Futurasmus Zentrum
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".