Order by:   Filter results: 
Web Code Reference Description Category Price
19165 93392 KNX occupancy detector with integrated KNX bus connector PD11-KNX-FLAT-DX SENSORS
  • Low profile KNX occupancy detector with integrated KNX bus connector
  • 1x Light (for regulating or switching), 1x slave output, 3 separate HVAC-blocs
  • HVAC mode (1=comfort, 2=stand-by, 3=economy, 4 = antifreeze/heat protection)
  • Intelligent semi-automatic mode, occupancy-independent regulating mode (photoelectric switch), full automatic mode
  • Individual adaption of the motion sensor sensitivity
  • Detection area can be extended thanks to master-slave-mode
  • Extensive optimization options for light measurement
  • Measured light value is communicated to the bus
  • Adaption of dimming curve
  • Measuring of mixed light thanks to internal light sensor
  • Determination of the reflection factor, e.g. on a desk, with the optional Infrared Luxmeter IR-LM
  • IR remote control-capable via IR remote control (optionally)
  • PIN code
  • Burn-in function for fluorescent lamps selectable from 1h till 100h
  • Various locking functions
  • Status LEDs can be activated / deactivated
  • IR remote control-capable via 5 button remote control, programmable at choice (accessory)
  • Programming button (phys. address) can be operated via remote control
  • Regulation/switching of three light groups via offset (external influence possible)
  • Manual influence via external KNX push buttons possible
  • Function control (heartbeat, cyclical sending)
  • Short presence, self-adjusting follow-up time, corridor function
  • Soft-start
  • Occupancy simulation
  • Forced switch-off
  • Two logic modules
  • Intelligent central-off function
  • Recall of light scenes
  • Premonition of switch-off
  • Behaviour upon bus voltage return definable at choice
  • Variable safety pause after switching off the lights
  • ??Temperature- and noise sensor
  • Settings ex ETS 4 for integration in KNX systems
  • The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
  • Spring clips for quick and easy installation in suspended ceilings
  • Includes blinds and clamp ring for installation in lightsApplication examples: offices, schools, nursery schools, hospitals, conference rooms.
  • 19165
    93392 KNX OCCUPANCY DETECTOR WITH INTEGRATED KNX BUS CONNECTOR PD11-KNX-FLAT-DX SENSORS
    19207 93365 Binary input or output device (4X push button interface) PBM-KNX-DX-4W INPUTS
    • Binary input or output device (push button interface) for pattress boxes (60 mm)
    • User-friendly ETS interface
    • Settings ex ETS 4 for integration in KNX systems
    • The product database for import into the ETS database can be downloaded from the B.E.G. homepage.


    Supply voltage: 21 - 31 V DC of the KNX bus

    Dimensions: 38 x 41 x 12 mm

    Nominal current: 9.5 mA (typ.) (Imax parametrierbar 12.5 mA bzw. 20 mA)

    Degree of protection / Class: IP20 / Class III

    Operating temperature: -5 ° C to +45 ° C

      Programming LED

    Connection type: 2 x 1 mm null Connector: 8 pin

      Imax 3.6 mA konst. (PWM) LED 3.5 V / 4 mA




    Manufacturer: B.E.G. Brück Electronic GmbH
    Color:
    Reference: 93365
    Name: PBM-KNX-DX-4W

    19207
    93365 BINARY INPUT OR OUTPUT DEVICE (4X PUSH BUTTON INTERFACE) PBM-KNX-DX-4W INPUTS
    19209 93381 KNX presence detector with integrated KNX-BUS interface PD2N-KNX-BA-UP SENSORS
    KNX presence detector with integrated KNX-BUS interface Flush-mounted version Parameterization as of ETS 4 for integration in KNX systems The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
    19209
    93381 KNX PRESENCE DETECTOR WITH INTEGRATED KNX-BUS INTERFACE PD2N-KNX-BA-UP SENSORS
    19214 93382 KNX presence detector with integrated KNX-BUS coupler Ceiling installation DETECTORS
    KNX presence detector with integrated KNX-BUS coupler Ceiling installation version Parameterization as of ETS 4 for integration in KNX systems The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
    19214
    93382 KNX PRESENCE DETECTOR WITH INTEGRATED KNX-BUS COUPLER CEILING INSTALLATION DETECTORS
    19217 93383 KNX presence detector with integrated KNX-BUS coupler flush-mounted version DETECTORS
    KNX presence detector with integrated KNX-BUS interface Flush-mounted version Parameterization as of ETS 4 for integration in KNX systems The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
    19217
    93383 KNX PRESENCE DETECTOR WITH INTEGRATED KNX-BUS COUPLER FLUSH-MOUNTED VERSION DETECTORS
    19208 93380 KNX occupancy detector with integrated KNX bus connector SENSORS
    • KNX occupancy detector with integrated KNX bus connector
    • Full automatic mode
    • 1x light (for switching), 1 separate HVAC bloc
    • Measuring of mixed light thanks to internal light sensor
    • Various locking functions
    • Status LEDs can be activated / deactivated
    • Behaviour upon bus voltage return definable at choice
    • Settings ex ETS 4 for integration in KNX systems
    • The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
    • Spring-clamps
    • Blinds
    • Application examples:
      corridors, halls, staircases, storage rooms, cellars, toilet
    •  

    • Voltage :

      24 V DC
      Dimensions:
      FC= Ø 83 x 55 mm
      FM= Ø 106 x 42 mm
      typ. power input :
      12 mA
      Detection area :
      vertical 360°
      Range :
      max. Ø 10 m across
      max. Ø 6 m towards
      max. Ø 4 m smaller movements
      Monitored surface, when the detector is mounted at the recommended height and for tangential approach :
      79 m²
      Mounting height min./max./recommended:
      2 m / 5 m / 2.5 m
      Degree / class of protection :
      FC= IP20 / Class II
      FM= IP20 / Class II
      Ambient temperature :
      -25 °C to +55 °C
      Housing :
      Polycarbonate, UV-resistant
      Number of light sensors:
      1
      Number of PIR sensors:
      1
      Brightness set value :
      5 - 2000 Lux
    19208
    93380 KNX OCCUPANCY DETECTOR WITH INTEGRATED KNX BUS CONNECTOR SENSORS
    19210 93360 KNX occupancy detector with integrated KNX bus connector DETECTORS
    KNX occupancy detector with integrated KNX bus connector
    1x Light (for regulating or switching), 1x slave output, 3 separate HVAC-blocs
    HVAC mode (1=comfort, 2=stand-by, 3=economy, 4 = antifreeze/heat protection)
    Intelligent semi-automatic mode, occupancy-independent regulating mode (photoelectric switch), full automatic mode
    Individual adaption of the motion sensor sensitivity
    Detection area can be extended thanks to master-slave-mode
    Extensive optimization options for light measurement
    Measured light value is communicated to the bus
    Adaption of dimming curve
    Mixed light measurement with internal and external light sensor
    Determination of the reflection factor, e.g. on a desk, with the optional Infrared Luxmeter IR-LM
    IR remote control-capable via IR remote control (optionally)
    PIN code
    Burn-in function for fluorescent lamps selectable from 1h till 100h
    Various locking functions
    Status LEDs can be activated / deactivated
    Programming button (phys. address) can be operated via remote control
    Regulation/switching of three light groups via offset (external influence possible)
    Manual influence via external KNX push buttons possible
    Function control (heartbeat, cyclical sending)
    Short presence, self-adjusting follow-up time, corridor function
    Soft-start
    Forced switch-off
    Intelligent central-off function
    Recall of light scenes
    Premonition of switch-off
    Behaviour upon bus voltage return definable at choice
    Variable safety pause after switching off the lights
    ??Temperature- and noise sensor
    Settings ex ETS 4 for integration in KNX systems
    The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
    Spring-clamps
    19210
    93360 KNX OCCUPANCY DETECTOR WITH INTEGRATED KNX BUS CONNECTOR DETECTORS
    19213 93361 KNX presence detector with integrated KNX-BUS interface Flush-mounted DETECTORS

    KNX presence detector with integrated KNX-BUS interface Flush-mounted version Presence simulation Parameterization from ETS 4 onwards for integration in KNX systems The product database for import into the ETS database can be downloaded from the B.E.G. homepage.

    https://www.beg-luxomat.com/es/productos/luxomatnet/knx/detectores-de-presencia-serie-deluxe-knx-dx/pd2n-knx-dx/

    19213
    93361 KNX PRESENCE DETECTOR WITH INTEGRATED KNX-BUS INTERFACE FLUSH-MOUNTED DETECTORS


    KNX SPECIAL CATALOGUES
    Push buttons
    Smart metering
    MDT Catalog 2017
    Iddero Verso Interactive Presentation

    LEARN
    Free webinars
    uBrick Tutorials
    VideoTutorials CBSE
    TEST
    Free test of CBSE visualization

    LATEST KNX NEWS
    All news

    LATEST KNX OFFERS
    All offers
    DOWNLOADS
    KNX - All brands

    FUTURASMUS KNX GROUP
    Contact
    Location
    Futurasmus in the world
    FOLLOW US
    YouTube Channel
    Facebook
    LinkedIN
    Google+
    Twitter

    KNX++ TRAINING CENTER
    Futurasmus Zentrum
    SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
    Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
    USE OF COOKIES
    We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".